Aeronautica Norwind 29-225kW Wind Turbine
The Aeronautica Norwind 29-225kW Wind Turbine is based on Acciona's experience of operating thousands of megawatts of wind turbines worldwide in all types of conditions. It has been designed to optimize the life-cycle cost of a wind turbine, not merely the upfront capital cost.
The turbine is designed from an owner's perspective. Features such as two bearings reducing the axial loads on the gear box, access to the inside of the hub from the nacelle, and a wider nacelle for easier serviceability.
The Aeronautica Norwind 29-225kW Wind Turbine is a 1500 kW power-rated horizontal shaft wind turbine, with three blades, variable speed 12 kV rated voltage and available in frequencies of 50 or 60 Hz.
Certified by Germanischer Lloyd (GL) for a wide range of wind types, available in IEC classifications:classes Ia, IIa and IIIb.
Aeronautica Norwind 29-225kW Wind Turbine Power Output Curve
The graph below shows the typical power produced for the Aeronautica Norwind 29-225kW Wind Turbine at different wind speeds.
Compare power curve with other turbines
Blade diameter is an important thing to look at when comparing turbines, since it effects how much power can be captured from the wind. This turbine has a blade diameter of 29 metres.
| || |
If you are thinking of buying a Aeronautica Norwind 29-225kW Wind Turbine, we'd advise measuring the local wind resource first to give you a better idea of how much power you can expect to generate.
| || |
UK discounts available?