Renusol REN-520052-K

Renusol REN-520052-K – this is an independent review for  Renusol REN-520052-K we have compiled for your reference. Feel free to add your comments or experiences at the bottom of the page.

Part No:     REN-520052-K
Description:     ConSole 5.2 (incl. Mounting material and U-Profile)
Category:     PV Mounting - Flat Roof Tray
Items:     1
Weight:     7.4 kg
Length:     1.51 m
PV Light:

The ConSol + provides an angle of 15 degrees

The ConSol assembly system is the ideal solution for installing PV modules on flat roofs with a pitch of up to 5 degrees without roof penetration. Most commercially available framed standard PV modules fit on the ConSol.

The ConSol is weighed down with ballast (gravel, paving slabs, etc) in order to resist the wind loads. The necessary weight of the ballast depends on the height of the building, its location and the condition of the ground and the wind and snow loads. Reference values for the necessary ballasts are contained in "Preparing the Assembly - Point 2" in the table of Page 5 of the installation manual.

Details:
Colour: black
Suitable for flat-roof- and ground mounting installations
For framed PV-modules

Technical Data:
Material: HDPE, Aluminium and stainless steel
Weight: 5,686 kg
Max. module length: 1340-1750 mm
Holes gap - width*: 895-1014 mm
* with Item No. 460001 optional: 1015-1085 mm
Holes gap - length: 520-1190 mm
Other Contents:
1 x 500052 ConSole 5.2
2 x 400005 Aluminium U-Profile 1035 mm
4 x 900027 Hexag. screw DIN933-M6x20 A2-70
4 x 900028 Washer DIN9021-6,4-A2
4 x 900029 Self-locking hexag. nut DIN985-M6-A2
4 x 900106 ConSole Clip
4 x 900115 Hexag. screw DIN7504-ST5,5x25-A2-SW8